Locked BOOT ERROR AFTER SHUTTING DOWN

[manelucky]

Hello, Many thanks for u all
i just encountered a problem, my boot disk only can boot after i rebuilded the mbr on DLC boot, and only can boot by restarting my desktop, but can't boot if i shut it down
this is what i did :
1. boot using DCL Boot flashdrive
2. open aomei partition tool and rebuild mbr on my internal hard drive
3. restart desktop to boot using internal hard drive and it can boot
4. restart again and it can boot successfully
5. shutting down but it goes boot loop just like while encountered boot path error
Please lend me a hand to make my desktop boot normally

 

[Uncle Mac]

Thats just awful.. For Pete Sakes what OS are you using and what is your Machine specs???

 

[manelucky]

ASUS X407UA
Processor Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz 1.99 GHz
Installed RAM 4,00 GB (3,89 GB usable)
System type 64-bit operating system, x64-based processor


Edition Windows 10 Home
Version 21H2
Installed on ‎06/‎12/‎2019
OS build 19044.1766
Experience Windows Feature Experience Pack 120.2212.4170.0

 

[Jerry_Xristos]

Check the health of your HDD with a program, because its sounds to me as your HDD is coming to his end
Is your HDD too old?

 

[raj7000]

Looks Like Boot issue & OS issue not HDD issue. If HDD is failing then it wont boot at all. Need to Reset the OS

 

[Jerry_Xristos]

Looks Like Boot issue & OS issue not HDD issue. If HDD is failing then it wont boot at all. Need to Reset the OS

If you can make a new installation or if you have a back up, recover your system

 

[mikal_s]

I have had the very same problem on two of my comps... and both times it was this that sorted the problem...

a compatibility issue with the Fast Startup component.

Try the below

1. Open Control Panel / Power Options.
2. On the Left side menu, select Choose what the power buttons do.
3. Select Change settings that are currently unavailable.
4. Scroll down to the Shutdown settings section.
5. Remove the check mark from the Turn on Fast Startup option.
6. Select the Save Changes Button.

Turn off the computer as normal from the shut down menu.. keep fingers crossed..

Hope works for you as did for me..

The above is what I used from the microshit website.

 

[manelucky]

you are right, i reinstalling using latest rufus, and it works

Looks Like Boot issue & OS issue not HDD issue. If HDD is failing then it wont boot at all. Need to Reset the OS

and thanks for all of you by helping me figure it out

 

[localyevme]

inter dlc boot from usb
2* run wpe windos 10 from dlc boot
3* cmd
4* bootrec /fix boot
5* bootrec /fixmbr
6* bootrec /rebuildbcd
*7 reboot your pc