- Downloaded
- 256.6 GB
- Uploaded
- 367.4 GB
- Ratio
- 1.43
- Seedbonus
- 18,071
- Upload Count
- 1 (1)
Member for 6 years
To have the opportunity to use a second or multiple operating systems, some use VirtualBox or VMware Workstation ...
But unfortunately they can not use all the resources of the computer (RAM & CPU ..)
So personally I decided to install a parallel OS
Every one know
I will show you a simple way to install an OS parallel to the original system on the same computer without the need to use a Usb Flash or CD
For that we will need :
and of cours our OS (ISO)
(you can find awesome one
We will prepare the installation site ...
we use Macrorit Partition Expert
Resize your partition to get un-allocated one, then create a first one
(choose 4 - 5 GB according to the size of the ISO)
the rest will be used for the real space of the second OS.
Restart the computer and wait some time to finish the operation
Now use UltraISO to extract the contents of ISO in the partition 1
(you can also use any similar software)
And it's time to use EasyBCD
After install go to : Add New Entry the press Medicines to open boot.wim
(you can change the Name)
and finally press : Add Entry
Reboot the computer an other time
you will get too choies : choose NST WinPE Image (or the name changed)
and Install your OS normally
That's the result for me
I hope you really appreciate this instruction tutorial
and that was useful for some of you.
But unfortunately they can not use all the resources of the computer (RAM & CPU ..)
So personally I decided to install a parallel OS
Every one know
You must be registered for see links
but the problem that I do not have a Usb Flash lolI will show you a simple way to install an OS parallel to the original system on the same computer without the need to use a Usb Flash or CD
For that we will need :
You must be registered for see links
You must be registered for see links
You must be registered for see links
and of cours our OS (ISO)
(you can find awesome one
You must be registered for see links
)We will prepare the installation site ...
we use Macrorit Partition Expert
Resize your partition to get un-allocated one, then create a first one
(choose 4 - 5 GB according to the size of the ISO)
the rest will be used for the real space of the second OS.
Restart the computer and wait some time to finish the operation
Now use UltraISO to extract the contents of ISO in the partition 1
(you can also use any similar software)
And it's time to use EasyBCD
After install go to : Add New Entry the press Medicines to open boot.wim
(you can change the Name)
and finally press : Add Entry
Reboot the computer an other time
you will get too choies : choose NST WinPE Image (or the name changed)
and Install your OS normally
That's the result for me
I hope you really appreciate this instruction tutorial
and that was useful for some of you.