M
Mr. Zsky
Program version: 21.11.2.1645
Official site: Lexua
Interface language: English and others
Treatment: not required
System requirements
• Windows 2000 SP4
• WindowsXP 32/64 bit
• Windows Server 2003 32/64 bit
• Windows Vista 32/64 bit
• Windows 2008 32/64 bit
• Windows 2008 R2 64 bit
• Windows 7 32/64 bit
• Windows 8 32/64 bit
• Windows 2012 64 bit (not tested)
• Windows 8.1 32/64 bit
• Windows 2012 R2 64 bit ( not tested)
• Windows 10 32/64 bit
• Windows 10 Server 64 bit
• Windows 11 64 bit
• Windows Server 2022 R2 64 bit (not tested)
> Description <
This disk is a collection of drivers with the ability to install the necessary drivers in a few clicks.
The program automatically detects which drivers are required for a given computer. Works with standard installers, unpacked drivers.
Additional Information:
ATTENTION !!! This version uses only extended driver database (* _ DBX.ini) + index files (*. Idx) to speed up the search procedure. Not compatible with versions 9.x and below.
OS Compatibility
• Compatible with Windows 2000
• Compatible with XP: Full
• Compatible with Vista: Full
• Compatible with Windows 7: Full
• Compatible with Windows 8: Full
• Compatible with Windows 8.1: Full
• Compatible with Windows 10: Full (TP build 9885 and above)
• Compatible with Windows 11: Full
Determined devices
• Chipset
• Video
• Audio
• NIC and PCI modems
• HDD controllers
• IEEE 1394 Host controllers
• USB Host controllers
• CardBus controllers
• USB Devices
• LPT printers
• Serial external modems
• PCMCIA devices
Some common ACPI devices. The number of drivers found by the program for This or that OS depends only on the availability of those on the disk (limited by the size of the disk) and the correctness of filling in the paths in the corresponding configuration files. Users can add or remove drivers from the disk themselves and replenish the HWID base.
This program was written for myself and my friends and is accordingly supplied As Is. The drivers on the disk have not been tested for compatibility with all operating systems for which they are stated. The author is not responsible for any damage caused by using this program.
Creation of driver bases
The procedure is as follows:
1. Unpack the driver from the installer to get access to the inf-files of the driver in any folder. For this purpose I am using Universal Extractor and
Total commander with corresponding Multiarc add-ons.
2. Start the Driver Database Generator.
a) Select for which versions of Windows the driver is intended.
b) Select which class the driver belongs to (Bridge, Display, Mutimedia, etc.)
c) Enter the original name of the section in the Name field or select from the existing ones if you want to update the driver
d) Press the "Create" button and specify the inf file (s) drivers for selected OS
Databases are created with HWID and driver versions in the extended database. If inf-files are different for different types of OS, then repeat the procedure, marking the corresponding versions of Windows. If there are full suffixes in the sections (like NTx86.6.0 NtAMD64.6.2, etc.), the generator will add them automatically, even if you have not checked these Windows versions.
However, the mark takes precedence over the suffixes. Unfortunately, not all driver creators follow the rules.
If you select the "Recreate" item, then all records in the specified section of the database will be deleted and the database for this driver will be created again. (It is useful to recreate when a new version of drivers is released, when the manufacturer removes support for one or another outdated hardware in the driver.)
The "Autosearch" checkbox disables the selection of inf-files and allows you to specify the folder with the unpacked driver. In this case, the search in the folder and subfolders of inf-files occurs automatically.
After completing the creation of the database, press ">" and get into the config editor. (You can also use the main menu, but it's more convenient.)
E) Copy the original driver installer to the folder of the corresponding class. (Display, Multimedia, etc.) Inside these folders you can create any of your own, so that there is no
file dump . The directory structure should be unchanged only in the root of the MCS Drivers disk and correspond to the classes.
f) Actually, again, we indicate for which windws the driver is intended and indicate the path to the driver.
If the file needs to be run with options (sometimes required), then add them in the "
If something needs to be launched before installing the driver or after, then add the path to the file in the "Programs" field, select the add-on number other than zero (better in order) and the launch time Before / After.
Click "Apply" Everything, the driver has been added.
If the driver installer is not a single exe-file, then you must first uncheck the "Pack" checkbox so that the workdirXXXX parameter is saved in the configuration file
(where XXXX is the OS type)
If the driver does not have an installer (only driver files as in driverpacks), then you also need uncheck the "Pack" checkbox, specify the folder with the driver, and select DPinst.exe (devcon32.exe) or DPinst64.exe (devcon64.exe) from the drop-down list as the executable file, depending on the bit depth.
How to update the distribution
Stop the previous one. Delete torrent (NOT CONTENT).
Download the torrent file from this distribution. Rename the old distribution folder to the name of this one.
Specify this folder in the torrent client and start downloading. After checking the content, the torrent client downloads new files.
After downloading, in the root of the distribution folder, run "Clear.exe", click "Search for extra files", wait for the scan and then click "Delete selected files".
"Refresh file list" - DO NOT PRESS.
PS. Upgrades from older versions have not been tested for this one. Perhaps (and logically) it will also work. Everything is at your own peril and risk.
Changes in version 21.11.2.1645
[*] Cosmetic interface changes
[+] Added the Reboot item in the Options menu and the corresponding setting.
[+] Windows 11 and Windows Server 2022 - detection (preliminary version)
[+] Support for Intel Core 12th generation
[+] Prime95 v30.7.1 - test that will help check the system for stability.
[*] The method of copying drivers to the local computer has been changed. Now, if more than one suitable driver is found,
the latest driver is copied. The xml file is also copied, if there is one next to the driver installer.
[*] Updated Display Driver Uninstaller v18.0.4.6
[*] Updated Crystal DiskInfo to v8.12.12
[*] Updated Crystal DiskMark to v8.0.4
[*] Updated Victoria to v5.37
[*] Updated HWiNFO to v7.14 - 4610 (stable)
[*] Updated CPU-Z to v1.98
[*] Updated SIV to v5.61
[*] Updated IsMyHdOK to v3.4.4
[*] Updated Microsoft .NET Framework v1.0_6.0 from Diakov!
[*] ATTO Disk Benchmark v4.01 has been updated
[-] TCP-Z - The program has not been developed for a long time and is out of date
[*] The language file has been updated. (Removed German and French due to the fact that the development environment does not support Unicode.)
[*] Updated the device database.
[*] Correcting bugs
> Screenshots <
> Download <