adriannn0255
Member
- Downloaded
- 135.7 GB
- Uploaded
- 63.6 GB
- Ratio
- 0.47
- Seedbonus
- 13
- Upload Count
- 0 (0)
Member for 1 years
I retested with another usb on the motherboard port in ntfs it's exactly the same error and my disk is 100% clean. Too bad I'll give up but thanks for the helpHow many time you must ask for loginui.exe???
One time is enough, just wait, we are not 24/7 in the forum, we also have a life outside the forum.
Just think that I might be leaving in the other side of the planet...................
This answer is for you @ufotruck2024 and not for @boysroundthere as you are the same person
@adriannn0255
even when placing on the ports of the motherboard I have the same error at 72% "0xC0000005
The most typical causes for the ‘0xC0000005: error are: corrupt registry, malware, faulty RAM or device driver, incorrectly written
So try amking a bootable usb with a new USB stick
And also
(Try the installation without the internet connected at all).
Again format your disk before attempting the installation.
Make sure no unnecessary peripherals are attached.
Try to plug only the HDD you want to make the installation
At Rufus
You must be registered for see linksCheck the NTFS option and not FAT
ok i will tryBurn with ; HASLEO WINTOUSB
It will work !