- Downloaded
- 248.2 GB
- Uploaded
- 76.6 TB
- Ratio
- 316.19
- Seedbonus
- 1,064,408
- Upload Count
- 0 (0)
Member for 2 years
Three year old build from new parts that has worked fine since assembly until yesterday.
Power up to 'no signal detected' with black screen on all (3) monitors. Monitors go into hibernate.
Same issue despite several restarts.
Disconnected monitor to a known working single test unit. Same result.
Checked all wiring for tight connections. All good. Nothing loose, no obvious breaks.
Nothing looks burnt or smells fried.
Removed graphics card and replaced with GForce 3070 RTX (NIB replacement).
Removed DDR4 Memory leaving one stick behind. A2 Front Slot (per manual).
RM 850 seems to be working/can tell fan is operating. Tight connections there as well.
After replacing the GPU. Turn on and now get the Republic of Gamers logo screen and text saying 'press hold del or F2 to enter bios'
but no boot circling graphic and pressing del/F2 has no effect.
Replaced M.2 SSD sticks with NIB replacements. No change.
Have cleared the CMOS via rear panel button and popped the battery out.
The Q COde LED on MB stays at 0.0 (Before this it would run through a number sequence on boot).
Color code below on start goes Yel., Red, White then Green, with the white and green on together.
No beeps.
OS:
MS vanilla Win 11 OS
Parts:
AMD Ryzen 7 5700 CPU - Mild overclock
ASUS ROG Crosshair VIII Hero MB
GPU Zotac GE Force 3080 TI Trinity 12 GB
Rip Jaws DDR4 Mem Stick - 4 Original, Removed 3 for testing
Samsung 4.0 NVMe M.2 SSD (2) - Removed - installed Crucial SSD NIB replacement.
Corsair RM 850x
Arctic Liquid Freezer 360 in front push/pull configuration.
Two bottom fans intake. Single Exit fan out rear panel below power. All fans working.
Fractal Torrent case.
Have done google searches to get to this point. Thinking the MB maybe fried or if I need to reinstall the OS/BIOS update? But would really appreciate advice from one with more experience with this stuff than me.
Its late here now, so will follow up later. Appreciate taking the time. TIA!
Power up to 'no signal detected' with black screen on all (3) monitors. Monitors go into hibernate.
Same issue despite several restarts.
Disconnected monitor to a known working single test unit. Same result.
Checked all wiring for tight connections. All good. Nothing loose, no obvious breaks.
Nothing looks burnt or smells fried.
Removed graphics card and replaced with GForce 3070 RTX (NIB replacement).
Removed DDR4 Memory leaving one stick behind. A2 Front Slot (per manual).
RM 850 seems to be working/can tell fan is operating. Tight connections there as well.
After replacing the GPU. Turn on and now get the Republic of Gamers logo screen and text saying 'press hold del or F2 to enter bios'
but no boot circling graphic and pressing del/F2 has no effect.
Replaced M.2 SSD sticks with NIB replacements. No change.
Have cleared the CMOS via rear panel button and popped the battery out.
The Q COde LED on MB stays at 0.0 (Before this it would run through a number sequence on boot).
Color code below on start goes Yel., Red, White then Green, with the white and green on together.
No beeps.
OS:
MS vanilla Win 11 OS
Parts:
AMD Ryzen 7 5700 CPU - Mild overclock
ASUS ROG Crosshair VIII Hero MB
GPU Zotac GE Force 3080 TI Trinity 12 GB
Rip Jaws DDR4 Mem Stick - 4 Original, Removed 3 for testing
Samsung 4.0 NVMe M.2 SSD (2) - Removed - installed Crucial SSD NIB replacement.
Corsair RM 850x
Arctic Liquid Freezer 360 in front push/pull configuration.
Two bottom fans intake. Single Exit fan out rear panel below power. All fans working.
Fractal Torrent case.
Have done google searches to get to this point. Thinking the MB maybe fried or if I need to reinstall the OS/BIOS update? But would really appreciate advice from one with more experience with this stuff than me.
Its late here now, so will follow up later. Appreciate taking the time. TIA!
Last edited: